P2A78 — Alt. fuel hydraulic pump pressure sensor: high signal
| Meaning | The control unit reads too high a voltage from the alternative fuel hydraulic pump pressure sensor. It usually indicates a wire shorted to the supply, an open ground or a failed sensor. The code concerns the signal, not necessarily the actual pressure. |
| Family | Powertrain (P) |
Typical symptoms
Gas limited or disabled
Uneven running on gas
Power loss
Switching to the main fuel
Common causes
Open sensor ground
Corroded or damaged connector
Faulty pressure sensor
Internal control unit problem, rare
What to do
How to read code P2A78
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2A78 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (78) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2A78 mean?
Alt. fuel hydraulic pump pressure sensor: high signal. The control unit reads too high a voltage from the alternative fuel hydraulic pump pressure sensor. It usually indicates a wire shorted to the supply, an open ground or a failed sensor. The code concerns the signal, not necessarily the actual pressure.
Can I keep driving with code P2A78 active?
With caution: limp mode possible, have it checked soon
Common causes — P2A78
Wire shorted to the supply Open sensor ground Corroded or damaged connector Faulty pressure sensor Internal control unit problem, rare
How do you fix code P2A78?
Have the sensor ground and wiring checked first, then the sensor. In the meantime it is wise to use the main fuel.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2A77 — Alt. fuel hydraulic pump pressure sensor: low sign...
- Next code: P2A79 — Alt. fuel hydraulic pump pressure sensor: erratic...
Related codes
- P2A00 — O2 sensor circuit range/performance, bank 1 sensor 1
- P2A01 — O2 sensor circuit range/performance, bank 1 sensor 2
- P2A02 — O2 sensor circuit range/performance, bank 1 sensor 3
- P2A03 — O2 sensor circuit range/performance, bank 2 sensor 1
- P2A04 — Bank 2 Sensor 2 oxygen sensor signal not plausible
- P2A05 — Bank 2 Sensor 3 oxygen sensor signal not plausible
- P2A06 — Bank 1 Sensor 1 oxygen sensor negative voltage
- P2A07 — Bank 1 Sensor 2 oxygen sensor negative voltage
- P2A08 — Bank 1 Sensor 3 oxygen sensor negative voltage
- P2A09 — Bank 2 Sensor 1 oxygen sensor negative voltage
- P2A0A — Manifold pressure sensor B circuit fault
- P2A0B — Manifold pressure sensor B signal not plausible