Skip to content
Fault code dictionary (DTC)

P2D70 — Charging negative contactor D: circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detected a general fault in the circuit of negative contactor D of the charging system. The code signals that something is wrong but does not say by itself whether the problem is electrical or mechanical. The negative contactor closes the return side of the current; the letter D depends on the manufacturer and I have no reliable information on which contactor it is on your car.
FamilyPowertrain (P)

Typical symptoms

No charging or charging interrupted
Hybrid or electric system warning light on
Charging-related error message
Reduced power or limp-home mode
Inconsistent problem

Common causes

Damaged contactor connector or wiring
Worn internal contactor
Insufficient 12-volt supply to the circuit
Fault in the charging or battery management module
Moisture or corrosion in the contacts

What to do

A diagnosis with a suitable tool is needed to tell whether the fault is electrical or in the contactor. Start with connectors and the 12-volt supply. The work should be entrusted to personnel qualified for high voltage, without too much delay.

How to read code P2D70

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2D70 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2D70 mean?

Charging negative contactor D: circuit fault. The control module detected a general fault in the circuit of negative contactor D of the charging system. The code signals that something is wrong but does not say by itself whether the problem is electrical or mechanical. The negative contactor closes the return side of the current; the letter D depends on the manufacturer and I have no reliable information on which contactor it is on your car.

Can I keep driving with code P2D70 active?

With caution: limp mode possible, have it checked soon

Common causes — P2D70

Damaged contactor connector or wiring Worn internal contactor Insufficient 12-volt supply to the circuit Fault in the charging or battery management module Moisture or corrosion in the contacts

How do you fix code P2D70?

A diagnosis with a suitable tool is needed to tell whether the fault is electrical or in the contactor. Start with connectors and the 12-volt supply. The work should be entrusted to personnel qualified for high voltage, without too much delay.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes