Skip to content
Fault code dictionary (DTC)

U01B0 — Lost communication with battery monitor module

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit that stored this code no longer receives messages from the module that tracks the battery's condition (voltage, current, temperature, charge). Without that data the system can't tell how the battery is doing and may limit performance as a precaution. Depending on the manufacturer, the module may be a separate unit or built into the battery.
FamilyNetwork (U)

Typical symptoms

Battery or general warning light on
Charge gauge stuck or showing inconsistent values
Start&stop or regenerative braking disabled
Reduced power or limited charging
Uncertain starting after the car has sat
Other communication codes stored

Common causes

Corroded or loose module connector (often at the battery terminal or sensor)
Discharged battery or unstable voltage
Broken data wiring or damaged insulation
Failed battery monitor module
Fault on the CAN or LIN line linking it to the control unit
Faulty supply fuse

What to do

First check the battery terminals, the sensor connector and the state of charge. Then have all stored codes read. The car often stays drivable, but without monitoring a failing battery can leave you stranded, so don't put the check off for too long.

How to read code U01B0

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U01B0 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U01B0 mean?

Lost communication with battery monitor module. The control unit that stored this code no longer receives messages from the module that tracks the battery's condition (voltage, current, temperature, charge). Without that data the system can't tell how the battery is doing and may limit performance as a precaution. Depending on the manufacturer, the module may be a separate unit or built into the battery.

Can I keep driving with code U01B0 active?

With caution: limp mode possible, have it checked soon

Common causes — U01B0

Corroded or loose module connector (often at the battery terminal or sensor) Discharged battery or unstable voltage Broken data wiring or damaged insulation Failed battery monitor module Fault on the CAN or LIN line linking it to the control unit Faulty supply fuse

How do you fix code U01B0?

First check the battery terminals, the sensor connector and the state of charge. Then have all stored codes read. The car often stays drivable, but without monitoring a failing battery can leave you stranded, so don't put the check off for too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes