Skip to content
Fault code dictionary (DTC)

U0244 — Lost communication with running board control module A

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe car's network no longer gets an answer from the module that drives the running boards, usually the power-deploying ones that extend when a door opens, fitted to SUVs and vans. The letter A is a manufacturer-assigned label: if there is more than one module, I have no reliable information on which side or board it controls.
FamilyNetwork (U)

Typical symptoms

The running board does not extend or retract
The board stops halfway
Slow or jerky movement
Running board fault message on the dashboard
The board moves only manually or not at all

Common causes

Dirty, corroded or damaged connector or wiring under the board
Fuse or relay feeding the motor
Dirt, mud or ice jamming the mechanism
Low battery voltage
Failed module
Problem on the communication line

What to do

Carefully clean the board area and have the fuse checked. Do not touch the moving parts while the car is on. It will not stop the car, but a board stuck out of line can be a hazard: if it stays extended, have it looked at soon.

How to read code U0244

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0244 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0244 mean?

Lost communication with running board control module A. The car's network no longer gets an answer from the module that drives the running boards, usually the power-deploying ones that extend when a door opens, fitted to SUVs and vans. The letter A is a manufacturer-assigned label: if there is more than one module, I have no reliable information on which side or board it controls.

Can I keep driving with code U0244 active?

With caution: limp mode possible, have it checked soon

Common causes — U0244

Dirty, corroded or damaged connector or wiring under the board Fuse or relay feeding the motor Dirt, mud or ice jamming the mechanism Low battery voltage Failed module Problem on the communication line

How do you fix code U0244?

Carefully clean the board area and have the fuse checked. Do not touch the moving parts while the car is on. It will not stop the car, but a board stuck out of line can be a hazard: if it stays extended, have it looked at soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes