Skip to content
Fault code dictionary (DTC)

U0250 — Lost communication with impact classification module

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the module that assesses the severity of a collision, a unit linked to occupant protection systems. The code indicates a communication problem with this module. Because a safety system is involved, the fault should be taken seriously, even though I have no reliable information on how each brand uses it.
FamilyNetwork (U)

Typical symptoms

Airbag warning light on
Safety system fault message
Possible other codes on the airbag systems
No obvious driving symptoms
Safety functions reported as unavailable

Common causes

Loose connector at the module or impact sensors
Damaged wiring, for example after a collision or repair
Weak battery or unstable voltage
Moisture in the connector
Faulty module
Break on the network line

What to do

With the airbag light on, the system may not deploy in an accident, so have the car checked without waiting. Do not dismantle or unplug airbag connectors yourself, as they are hazardous components. Checking the battery is the only simple check you can do.

How to read code U0250

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0250 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0250 mean?

Lost communication with impact classification module. The control unit is no longer receiving messages from the module that assesses the severity of a collision, a unit linked to occupant protection systems. The code indicates a communication problem with this module. Because a safety system is involved, the fault should be taken seriously, even though I have no reliable information on how each brand uses it.

Can I keep driving with code U0250 active?

With caution: limp mode possible, have it checked soon

Common causes — U0250

Loose connector at the module or impact sensors Damaged wiring, for example after a collision or repair Weak battery or unstable voltage Moisture in the connector Faulty module Break on the network line

How do you fix code U0250?

With the airbag light on, the system may not deploy in an accident, so have the car checked without waiting. Do not dismantle or unplug airbag connectors yourself, as they are hazardous components. Checking the battery is the only simple check you can do.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes