Skip to content
Fault code dictionary (DTC)

U0253 — Lost communication with accessory protocol interface module

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the module that acts as an interface between the car and connected accessories, such as add-on devices or systems fitted after purchase. How it is used depends on the brand, and I have no reliable information to say in general. The code points to a communication or power supply problem.
FamilyNetwork (U)

Typical symptoms

Connected accessories not working
Add-on functions working intermittently
Fault messages on the dashboard
Other modules with lost communication
Abnormal battery drain

Common causes

Poorly fitted or incompatible accessory disturbing the network
Loose or corroded module connector
Blown fuse
Insufficient power or ground to the module
Faulty module
Break on the network line

What to do

Think back to whether an accessory or device connected to the car's network was recently fitted: it is the most common cause. Then check the battery and fuses, and have the other stored codes read. The car can usually be used, but do not put it off for long.

How to read code U0253

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0253 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0253 mean?

Lost communication with accessory protocol interface module. The control unit is no longer receiving messages from the module that acts as an interface between the car and connected accessories, such as add-on devices or systems fitted after purchase. How it is used depends on the brand, and I have no reliable information to say in general. The code points to a communication or power supply problem.

Can I keep driving with code U0253 active?

With caution: limp mode possible, have it checked soon

Common causes — U0253

Poorly fitted or incompatible accessory disturbing the network Loose or corroded module connector Blown fuse Insufficient power or ground to the module Faulty module Break on the network line

How do you fix code U0253?

Think back to whether an accessory or device connected to the car's network was recently fitted: it is the most common cause. Then check the battery and fuses, and have the other stored codes read. The car can usually be used, but do not put it off for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes