Skip to content
Fault code dictionary (DTC)

U0255 — Lost communication with front display interface module

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving messages from the module that handles the front display interface, meaning the central screen or the visual part of the infotainment. How tasks are split depends on the brand, and I have no reliable information to say in general. The fault is in the communication with the module.
FamilyNetwork (U)

Typical symptoms

Central screen off, black or restarting
Picture with defects or frozen
On-screen controls not responding
Error message on the infotainment
Audio or navigation working intermittently

Common causes

Loose connector behind the screen
Weak battery locking up the system
Blown infotainment fuse
Frozen infotainment software
Damaged multimedia network cable
Faulty display module

What to do

Switch the car off, wait a few minutes and switch it back on: a software lock-up sometimes clears. Then check battery and fuses. If the screen also shows cameras or safety warnings, do not rely on it until it works properly. It is not a fault that requires stopping the car.

How to read code U0255

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0255 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0255 mean?

Lost communication with front display interface module. The control unit is no longer receiving messages from the module that handles the front display interface, meaning the central screen or the visual part of the infotainment. How tasks are split depends on the brand, and I have no reliable information to say in general. The fault is in the communication with the module.

Can I keep driving with code U0255 active?

With caution: limp mode possible, have it checked soon

Common causes — U0255

Loose connector behind the screen Weak battery locking up the system Blown infotainment fuse Frozen infotainment software Damaged multimedia network cable Faulty display module

How do you fix code U0255?

Switch the car off, wait a few minutes and switch it back on: a software lock-up sometimes clears. Then check battery and fuses. If the screen also shows cameras or safety warnings, do not rely on it until it works properly. It is not a fault that requires stopping the car.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes