U0264 — Lost communication with rear camera module
| Meaning | The control unit is no longer receiving messages from the rear camera module, the one that shows the image when reversing. If the module is not communicating, the image may be missing and systems that use it, such as parking assistance, may switch off. It does not stop you driving, but when maneuvering you must rely on mirrors and direct view. |
| Family | Network (U) |
Typical symptoms
Image missing or choppy
Parking assistance unavailable
Warning light or message on the dashboard
Other network codes in memory
Common causes
Cable damaged in the tailgate or bumper
Faulty fuse or power supply
Dirty lens or camera damaged by an impact
Faulty camera module
Weak battery
What to do
How to read code U0264
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code U0264 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0264 mean?
Lost communication with rear camera module. The control unit is no longer receiving messages from the rear camera module, the one that shows the image when reversing. If the module is not communicating, the image may be missing and systems that use it, such as parking assistance, may switch off. It does not stop you driving, but when maneuvering you must rely on mirrors and direct view.
Can I keep driving with code U0264 active?
With caution: limp mode possible, have it checked soon
Common causes — U0264
Corroded or water-affected camera connector Cable damaged in the tailgate or bumper Faulty fuse or power supply Dirty lens or camera damaged by an impact Faulty camera module Weak battery
How do you fix code U0264?
First check that the lens is clean and that there are no signs of impact or water ingress. The cable running through the tailgate is a classic failure point because of repeated flexing. It is not urgent, but maneuver carefully until it is fixed.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0263 — Lost communication with speech recognition module
- Next code: U0265 — Lost communication with image processing sensor A
Related codes
- U0200 — Lost communication with door control module B
- U0201 — Lost communication with door control module C
- U0202 — Lost communication with door control module D
- U0203 — Lost communication with door control module E
- U0204 — Lost communication with door control module F
- U0205 — Lost communication with door control module G
- U0206 — Lost communication with folding top control module
- U0207 — Lost communication with moveable roof control module
- U0208 — Lost communication with seat control module A
- U0209 — Lost communication with seat control module B
- U020A — Lost communication with moveable roof control module B
- U020B — Lost communication with door control module H