Skip to content
Fault code dictionary (DTC)

U026E — Lost communication with image processing sensor J

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit that stored this code no longer gets a reply from one of the image processing sensors or modules, essentially a camera or its module. The letter J identifies which one, but the assignment is up to the manufacturer and I cannot say for certain which it is on your make. The fault is in the communication on the car's internal network, not necessarily in the sensor itself.
FamilyNetwork (U)

Typical symptoms

Warning light or message on the dashboard
Camera-based driver assistance features unavailable
Camera image missing or black on the display
Other lost-communication codes stored at the same time
Function that comes and goes, especially with vibration or moisture

Common causes

Corroded or loose connector or wiring at the camera or module
Low or unstable supply voltage to the module
Poor fuse or ground connection for the module
Problem on the vehicle communication bus
Faulty image sensor or module
Outdated control unit software

What to do

First check the battery and, if you can, the fuses and connectors of the sensor involved. With this warning the assistance features may not work, so drive with extra care and have the code read with a tool suited to your make as soon as you can. Do not clear the code to make it disappear: it will return.

How to read code U026E

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U026E starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U026E mean?

Lost communication with image processing sensor J. The control unit that stored this code no longer gets a reply from one of the image processing sensors or modules, essentially a camera or its module. The letter J identifies which one, but the assignment is up to the manufacturer and I cannot say for certain which it is on your make. The fault is in the communication on the car's internal network, not necessarily in the sensor itself.

Can I keep driving with code U026E active?

With caution: limp mode possible, have it checked soon

Common causes — U026E

Corroded or loose connector or wiring at the camera or module Low or unstable supply voltage to the module Poor fuse or ground connection for the module Problem on the vehicle communication bus Faulty image sensor or module Outdated control unit software

How do you fix code U026E?

First check the battery and, if you can, the fuses and connectors of the sensor involved. With this warning the assistance features may not work, so drive with extra care and have the code read with a tool suited to your make as soon as you can. Do not clear the code to make it disappear: it will return.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes