Skip to content
Fault code dictionary (DTC)

U027A — Lost communication with battery charger control module C

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit no longer gets a reply from a battery charger control module, typical of plug-in hybrid or electric cars. The letter C marks one of the modules, but which one it is on your car is decided by the manufacturer and I cannot say for certain. It can make charging difficult or impossible.
FamilyNetwork (U)

Typical symptoms

Charging does not start or stops
Warning light or message about the charging or high-voltage system
Range or battery charge different from usual
Other network codes
Functions that come and go

Common causes

Poor contact at the charger connector or wiring
Unstable low-voltage supply to the module
Faulty fuse
Problem on the communication bus
Faulty charger module
Software needing an update

What to do

Check the 12-volt battery and try charging with a different cable or charging point. Do not work on high-voltage parts yourself: trained personnel are needed. If the car does not charge or high-voltage system warnings appear, have it checked soon.

How to read code U027A

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U027A starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U027A mean?

Lost communication with battery charger control module C. The control unit no longer gets a reply from a battery charger control module, typical of plug-in hybrid or electric cars. The letter C marks one of the modules, but which one it is on your car is decided by the manufacturer and I cannot say for certain. It can make charging difficult or impossible.

Can I keep driving with code U027A active?

With caution: limp mode possible, have it checked soon

Common causes — U027A

Poor contact at the charger connector or wiring Unstable low-voltage supply to the module Faulty fuse Problem on the communication bus Faulty charger module Software needing an update

How do you fix code U027A?

Check the 12-volt battery and try charging with a different cable or charging point. Do not work on high-voltage parts yourself: trained personnel are needed. If the car does not charge or high-voltage system warnings appear, have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes