Skip to content
Fault code dictionary (DTC)

U0285 — Lost communication with active grille air shutter module B

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit no longer gets a reply from a module that operates the movable slats of the front grille. The letter B sets it apart from module A, but which one it is on your car is set by the manufacturer and I will not guess. If the slats stay still, cooling may suffer.
FamilyNetwork (U)

Typical symptoms

Warning light or fault message
Slats stuck in one position
Abnormal engine temperature in some conditions
Noises from the grille
Other lost-communication codes

Common causes

Damaged or dirty connector or wiring
Stuck slat mechanism
Faulty power or ground
Problem on the bus
Faulty module

What to do

Check that the slats move freely and that the connector is intact. Watch the engine temperature and, if it rises too much, stop and have it checked. The code should not be cleared.

How to read code U0285

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0285 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0285 mean?

Lost communication with active grille air shutter module B. The control unit no longer gets a reply from a module that operates the movable slats of the front grille. The letter B sets it apart from module A, but which one it is on your car is set by the manufacturer and I will not guess. If the slats stay still, cooling may suffer.

Can I keep driving with code U0285 active?

With caution: limp mode possible, have it checked soon

Common causes — U0285

Damaged or dirty connector or wiring Stuck slat mechanism Faulty power or ground Problem on the bus Faulty module

How do you fix code U0285?

Check that the slats move freely and that the connector is intact. Watch the engine temperature and, if it rises too much, stop and have it checked. The code should not be cleared.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes