Skip to content
Fault code dictionary (DTC)

U0331 — Software incompatibility with body control module A

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningA control unit found that the software in body control module A, the unit that manages lights, locks, windows and other body functions, does not match the software of the other modules. The letter A tells it apart when the car has more than one. It often comes from a replacement or from incorrect programming.
FamilyNetwork (U)

Typical symptoms

Lights, wipers or central locking behaving oddly
Warning lights or error messages on the dash
Remote or key recognized only some of the time
Comfort functions not responding
Battery draining faster than normal

Common causes

Body control module replaced without being coded to the vehicle
Software update interrupted or incomplete
Software version not suited to this model or trim
Mismatched versions between modules after a partial job
Faulty module, which is less common

What to do

Have all modules scanned and the software versions checked against the manufacturer data. Do not clear the code without fixing the cause. If you have trouble starting, with lights or with locks, get it checked soon.

How to read code U0331

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code U0331 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0331 mean?

Software incompatibility with body control module A. A control unit found that the software in body control module A, the unit that manages lights, locks, windows and other body functions, does not match the software of the other modules. The letter A tells it apart when the car has more than one. It often comes from a replacement or from incorrect programming.

Can I keep driving with code U0331 active?

With caution: limp mode possible, have it checked soon

Common causes — U0331

Body control module replaced without being coded to the vehicle Software update interrupted or incomplete Software version not suited to this model or trim Mismatched versions between modules after a partial job Faulty module, which is less common

How do you fix code U0331?

Have all modules scanned and the software versions checked against the manufacturer data. Do not clear the code without fixing the cause. If you have trouble starting, with lights or with locks, get it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes