Skip to content
Fault code dictionary (DTC)

U0406 — U0406 – Invalid data from fuel injector control module

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningA control unit received a message over the network from the module that drives the fuel injectors, but the data was not valid. The module and the network are communicating, but the information is not believable. The code does not say whether the fault is in the module, the wiring or the receiving unit.
FamilyNetwork (U)

Typical symptoms

Engine warning light on
Rough running engine or limp mode
Loss of power
Hard starting or engine stalling
Unusual fuel consumption or smoke
Other communication codes stored with this one

Common causes

Low or unstable battery voltage
Corroded or damaged connectors or wiring at the injector module
Problem on the communication line (CAN)
Faulty injector control module
Outdated control unit software
Faulty receiving control unit (rare)

What to do

Have the battery, grounds and module connectors checked right away. Since this concerns the engine's fuel supply, if the car loses power or stalls it is better not to keep driving and to have it seen soon.

How to read code U0406

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code U0406 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0406 mean?

U0406 – Invalid data from fuel injector control module. A control unit received a message over the network from the module that drives the fuel injectors, but the data was not valid. The module and the network are communicating, but the information is not believable. The code does not say whether the fault is in the module, the wiring or the receiving unit.

Can I keep driving with code U0406 active?

With caution: limp mode possible, have it checked soon

Common causes — U0406

Low or unstable battery voltage Corroded or damaged connectors or wiring at the injector module Problem on the communication line (CAN) Faulty injector control module Outdated control unit software Faulty receiving control unit (rare)

How do you fix code U0406?

Have the battery, grounds and module connectors checked right away. Since this concerns the engine's fuel supply, if the car loses power or stalls it is better not to keep driving and to have it seen soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes