U0512 — Invalid data received from seat control module D
| Meaning | The control unit received data from seat module D that isn't valid. The network link is there, but the messages can't be relied on. Which seat corresponds to "D" is set by the manufacturer, and I have no reliable basis to name it in general. |
| Family | Network (U) |
Typical symptoms
Position memories not working
Heated or ventilated seat off
Safety warning light on in some models
Communication error warnings
Common causes
Oxidized or loose connector under the seat
Wires worn by seat movement
Faulty seat module
Faulty module ground
Outdated software
What to do
How to read code U0512
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U0512 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U0512 mean?
Invalid data received from seat control module D. The control unit received data from seat module D that isn't valid. The network link is there, but the messages can't be relied on. Which seat corresponds to "D" is set by the manufacturer, and I have no reliable basis to name it in general.
Can I keep driving with code U0512 active?
With caution: limp mode possible, have it checked soon
Common causes — U0512
Low or unstable battery voltage Oxidized or loose connector under the seat Wires worn by seat movement Faulty seat module Faulty module ground Outdated software
How do you fix code U0512?
Start with the battery and grounds, then carefully check the connectors and cables under the seat. If airbag warnings appear, don't wait: have a full diagnosis done.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U0511 — Invalid data received from seat control module C
- Next code: U0513 — Invalid data received from yaw rate sensor module
Related codes
- U0501 — Invalid data from door control module B
- U0502 — Invalid data received from door control module C
- U0503 — Invalid data received from door control module D
- U0504 — Invalid data received from door control module E
- U0505 — Invalid data received from door control module F
- U0506 — Invalid data received from door control module G
- U0507 — Invalid data received from folding top control module
- U0508 — Invalid data received from moveable roof control module A
- U0509 — Invalid data received from seat control module A
- U050A — Invalid data received from seat control module B
- U050B — Invalid data received from moveable roof control module B
- U050C — Invalid data received from door control module H