U055E — Invalid Data Received from Seat Control Module
| Meaning | Your car's central computer has noticed that the module managing the seat controls is sending out garbled or unexpected digital messages over the network. This usually means the seat module itself is glitching or there is a communication breakdown in the wiring harness. |
| Family | Network (U) |
Typical symptoms
Memory seat settings might fail to save or recall
Heated or ventilated seat functions could stop responding
Common causes
Poor or corroded wiring connections at the seat module plug
An internal hardware failure within the seat control module itself
What to do
How to read code U055E
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U055E starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U055E mean?
Invalid Data Received from Seat Control Module. Your car's central computer has noticed that the module managing the seat controls is sending out garbled or unexpected digital messages over the network. This usually means the seat module itself is glitching or there is a communication breakdown in the wiring harness.
Can I keep driving with code U055E active?
With caution: limp mode possible, have it checked soon
Common causes — U055E
A temporary software glitch in the seat control module Poor or corroded wiring connections at the seat module plug An internal hardware failure within the seat control module itself
How do you fix code U055E?
Check the wiring plug underneath the affected seat to ensure it is clean and plugged in tightly. This is not an urgent mechanical danger, but you should have a shop scan the specific module for internal fault codes if the issue persists.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U055D — Invalid Data Received From Seat Control Module
- Next code: U055F — Invalid Data Received From Specific Control Module
Related codes
- U0501 — Invalid data from door control module B
- U0502 — Invalid data received from door control module C
- U0503 — Invalid data received from door control module D
- U0504 — Invalid data received from door control module E
- U0505 — Invalid data received from door control module F
- U0506 — Invalid data received from door control module G
- U0507 — Invalid data received from folding top control module
- U0508 — Invalid data received from moveable roof control module A
- U0509 — Invalid data received from seat control module A
- U050A — Invalid data received from seat control module B
- U050B — Invalid data received from moveable roof control module B
- U050C — Invalid data received from door control module H