U05B9 — Rear radar module C: invalid data received
| Meaning | A control unit received invalid data from the rear radar labeled "C", used for systems like blind spot monitoring and rear cross-traffic alert. Which radar letter C refers to depends on the manufacturer. The system may switch off. |
| Family | Network (U) |
Typical symptoms
Blind spot indicator missing or intermittent
Rear cross-traffic alert disabled
Fault light on the cluster
Other communication codes stored
Common causes
Interference or fault on the communication network
Radar misaligned after a bumper impact
Low or unstable battery voltage
Software needing an update
Faulty radar or dirty or damaged bumper
What to do
How to read code U05B9
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code U05B9 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code U05B9 mean?
Rear radar module C: invalid data received. A control unit received invalid data from the rear radar labeled "C", used for systems like blind spot monitoring and rear cross-traffic alert. Which radar letter C refers to depends on the manufacturer. The system may switch off.
Can I keep driving with code U05B9 active?
With caution: limp mode possible, have it checked soon
Common causes — U05B9
Damaged radar connector or wiring Interference or fault on the communication network Radar misaligned after a bumper impact Low or unstable battery voltage Software needing an update Faulty radar or dirty or damaged bumper
How do you fix code U05B9?
First check that the rear bumper is clean and undamaged, then the battery. While the system is out of use, check blind spots and reversing with mirrors and by looking over your shoulder; have the car checked as soon as you can.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: U05B8 — Rear radar module B: invalid data received
- Next code: U05BA — Rear radar module D: invalid data received
Related codes
- U0501 — Invalid data from door control module B
- U0502 — Invalid data received from door control module C
- U0503 — Invalid data received from door control module D
- U0504 — Invalid data received from door control module E
- U0505 — Invalid data received from door control module F
- U0506 — Invalid data received from door control module G
- U0507 — Invalid data received from folding top control module
- U0508 — Invalid data received from moveable roof control module A
- U0509 — Invalid data received from seat control module A
- U050A — Invalid data received from seat control module B
- U050B — Invalid data received from moveable roof control module B
- U050C — Invalid data received from door control module H