Skip to content
Fault code dictionary (DTC)

U0683 — Lost communication with throttle/pedal position sensor F

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is no longer receiving the signal from throttle or accelerator pedal position sensor F. These sensors tell the engine how much power is requested. The meaning of the letter F depends on the manufacturer. Power may be limited for safety.
FamilyNetwork (U)

Typical symptoms

Check engine light on
Reduced power or limp mode
Accelerator responding poorly
Irregular idle
Other communication codes stored

Common causes

Damaged or corroded sensor connector or wiring
Faulty pedal or throttle sensor
Low battery voltage or poor ground connection
Fault on the vehicle data line
Internal fault in the throttle body or control unit

What to do

Avoid overtaking and manoeuvres that need instant power until the car has been checked. Start with the battery, grounds and sensor connectors.

How to read code U0683

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code U0683 starts with U: it belongs to the network and communication between control units area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code U0683 mean?

Lost communication with throttle/pedal position sensor F. The control unit is no longer receiving the signal from throttle or accelerator pedal position sensor F. These sensors tell the engine how much power is requested. The meaning of the letter F depends on the manufacturer. Power may be limited for safety.

Can I keep driving with code U0683 active?

With caution: limp mode possible, have it checked soon

Common causes — U0683

Damaged or corroded sensor connector or wiring Faulty pedal or throttle sensor Low battery voltage or poor ground connection Fault on the vehicle data line Internal fault in the throttle body or control unit

How do you fix code U0683?

Avoid overtaking and manoeuvres that need instant power until the car has been checked. Start with the battery, grounds and sensor connectors.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes