00600 — Temperature Flap Positioning Motor Potentiometer-G92
| Meaning | Temperature Flap Positioning Motor Potentiometer-G92. |
| Family | Manufacturer-native code |
How to read code 00600
Code 00600 is a native VAG code: it is stored by the vehicle control unit and is read with a diagnostic tool that supports the manufacturer protocol, not with a generic OBD reader. This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code 00600 mean?
Temperature Flap Positioning Motor Potentiometer-G92.
Can I keep driving with code 00600 active?
With caution: limp mode possible, have it checked soon
How do you fix code 00600?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: 006 — Signal too high
- Next code: 00601 — Central Flap Positioning Motor Potentiometer-G112
Related codes
- 006 — Signal too high
- 00601 — Central Flap Positioning Motor Potentiometer-G112
- 00602 — Footwell/Defroster Flap Positioning Motor Potentiometer-G114...
- 00603 — Footwell/Defroster Flap Positioning Motor-V85
- 00604 — Fresh Air/Recirculation Flap Positioning Motor Potentiometer...
- 00605 — Fresh/Recirculated Air Two-Way Valve-N63
- 00606 — Coolant Shut-Off Valve Two-Way Valve-N147
- 00607 — Outside Temperature Display-G106
- 00608 — Load Status Sensor-G119
- 00609 — Ignition Output 1
- 00610 — Ignition Output 2
- 00611 — Ignition Output 3