19457 — Working speed regulation deviation
| Meaning | Working speed regulation deviation. |
| Family | Manufacturer-native code |
How to read code 19457
Code 19457 is a native VAG code: it is stored by the vehicle control unit and is read with a diagnostic tool that supports the manufacturer protocol, not with a generic OBD reader. This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code 19457 mean?
Working speed regulation deviation.
Can I keep driving with code 19457 active?
With caution: limp mode possible, have it checked soon
How do you fix code 19457?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: 19456 — Glow plug indicator lamp K29 fault message from in...
- Next code: 19458 — Kick-down switch F8 implausible signal
Related codes
- 19456 — Glow plug indicator lamp K29 fault message from instrument c...
- 19458 — Kick-down switch F8 implausible signal
- 19459 — Low Heat Output Relay -J359 Short Circuit to B+
- 19460 — Low Heat Output Relay -J359 Open/Short Circuit to Ground 194...
- 19461 — High Heat Output Relay -J360 Short Circuit to B+
- 19462 — High Heat Output Relay -J360 Open/Short Circuit to Ground
- 19463 — Camshaft position sensor-G40 no signal
- 19464 — Camshaft Position Sensor -G40 Signal Out of Tolerance
- 19465 — Fuel Cooling Pump Relay -J445 Short Circuit to B+
- 19466 — Fuel Cooling Pump Relay -J445 Open/Short Circuit to Ground 1...
- 19467 — Electric Fuel Pump Relay 2 -J49 Short Circuit to B+
- 19468 — Electric Fuel Pump Relay 2 -J49 Open/Short Circuit to