P1335 — Engine Torque Monitoring 2 Control Limit Exceeded
| Meaning | Engine Torque Monitoring 2 Control Limit Exceeded. |
| Family | Powertrain (P) |
How to read code P1335
Code P1335 is a native VAG code: it is stored by the vehicle control unit and is read with a diagnostic tool that supports the manufacturer protocol, not with a generic OBD reader. This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1335 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (3) points to ignition system or misfire, and the last two (35) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1335 mean?
Engine Torque Monitoring 2 Control Limit Exceeded.
Can I keep driving with code P1335 active?
With caution: limp mode possible, have it checked soon
How do you fix code P1335?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1332 — Cylinder 8 Knock Control Limit Attained
- Next code: P1336 — Engine Torque Adaptation At Limit
Related codes
- P1300 — Misfire Detected Fuel Level Too Low
- P1319 — Knock Sensor 1 Circuit Short To Ground
- P1320 — Knock Sensor 2 Circuit Short To Ground
- P1321 — Knock Sensor 3 Circuit Low Input
- P1322 — Knock Sensor 3 Circuit High Input
- P1323 — Knock Sensor 4 Circuit Low Input
- P1324 — Knock Sensor 4 Circuit High Input
- P1325 — Cylinder 1 Knock Control Limit Attained
- P1326 — Cylinder 2 Knock Control Limit Attained
- P1327 — Cylinder 3 Knock Control Limit Attained
- P1328 — Cylinder 4 Knock Control Limit Attained
- P1329 — Cylinder 5 Knock Control Limit Attained