Skip to content
Fault code dictionary (DTC)

B1706 — Driver seat recline rearward switch circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects that the circuit of the switch that tilts the driver backrest rearward is interrupted. The precise meaning is set by the manufacturer and I have no reliable information for your brand.
FamilyBody (B)

Typical symptoms

Backrest does not tilt rearward
Switch gives no reaction
Other seat movements remain normal
Works intermittently if the contact is unreliable

Common causes

Broken wire or unplugged connector under the seat
Worn internal switch contact
Corroded or bent connector terminal
Wiring broken by seat movement
Faulty seat control module (less common)

What to do

First make sure the connector under the seat is fully seated and the wires are not stretched. It is not urgent for safety, but it is worth having checked to restore the adjustment.

How to read code B1706

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1706 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1706 mean?

Driver seat recline rearward switch circuit open. The control unit detects that the circuit of the switch that tilts the driver backrest rearward is interrupted. The precise meaning is set by the manufacturer and I have no reliable information for your brand.

Can I keep driving with code B1706 active?

With caution: limp mode possible, have it checked soon

Common causes — B1706

Broken wire or unplugged connector under the seat Worn internal switch contact Corroded or bent connector terminal Wiring broken by seat movement Faulty seat control module (less common)

How do you fix code B1706?

First make sure the connector under the seat is fully seated and the wires are not stretched. It is not urgent for safety, but it is worth having checked to restore the adjustment.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes