B1711 — Driver seat front up switch circuit short to battery
| Meaning | The control unit detected battery voltage on the circuit of the switch that raises the front of the driver seat, where it should not be. The exact meaning is set by the manufacturer and I have no reliable information for your brand. |
| Family | Body (B) |
Typical symptoms
Front of the seat rises without you pressing anything
Movement does not stop when you release the switch
Other seat movements work normally
Common causes
Wire with damaged insulation touching a live wire
Liquid or dirt in the switch
Corroded connector under the seat
Faulty seat control module (less common)
What to do
How to read code B1711
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1711 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1711 mean?
Driver seat front up switch circuit short to battery. The control unit detected battery voltage on the circuit of the switch that raises the front of the driver seat, where it should not be. The exact meaning is set by the manufacturer and I have no reliable information for your brand.
Can I keep driving with code B1711 active?
With caution: limp mode possible, have it checked soon
Common causes — B1711
Seat switch with stuck or damaged contacts Wire with damaged insulation touching a live wire Liquid or dirt in the switch Corroded connector under the seat Faulty seat control module (less common)
How do you fix code B1711?
If the seat moves on its own, avoid driving in that position and have it checked soon, as it could interfere with driving. Otherwise check the switch and connector under the seat.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1710 — Driver seat front up switch circuit open
- Next code: B1712 — Driver seat front up switch circuit short to groun...
Related codes
- B1700 — Passenger seatbelt tension reducer circuit short to ground
- B1701 — Driver seat recline forward switch circuit failure
- B1702 — Driver seat recline forward switch circuit open
- B1703 — Driver seat recline forward switch circuit short to battery
- B1704 — Driver seat recline forward switch circuit short to ground
- B1705 — Driver seat recline rearward switch circuit failure
- B1706 — Driver seat recline rearward switch circuit open
- B1707 — Driver seat recline rearward switch circuit short to battery
- B1708 — Driver seat recline rearward switch circuit short to ground
- B1709 — Driver seat front up switch circuit failure
- B1710 — Driver seat front up switch circuit open
- B1712 — Driver seat front up switch circuit short to ground