Skip to content
Fault code dictionary (DTC)

C1910 — Right front shock actuator circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis code is manufacturer-defined. The ride control unit sees no continuity in the right front shock actuator circuit, as if a wire were broken or a connector unplugged. The exact behavior depends on the brand.
FamilyChassis (C)

Typical symptoms

Suspension stuck at a fixed setting
Ride control fault light or message
Right front feels stiffer or softer
Front dips more under braking

Common causes

Actuator connector unplugged or corroded
Wire broken by rubbing or suspension movement
Shock actuator with a broken internal winding
Faulty ride control unit

What to do

Have the connector and wire reaching the right front shock inspected. The suspension no longer adapts as intended, so drive carefully and do not put the check off.

How to read code C1910

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1910 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1910 mean?

Right front shock actuator circuit open. This code is manufacturer-defined. The ride control unit sees no continuity in the right front shock actuator circuit, as if a wire were broken or a connector unplugged. The exact behavior depends on the brand.

Can I keep driving with code C1910 active?

With caution: limp mode possible, have it checked soon

Common causes — C1910

Actuator connector unplugged or corroded Wire broken by rubbing or suspension movement Shock actuator with a broken internal winding Faulty ride control unit

How do you fix code C1910?

Have the connector and wire reaching the right front shock inspected. The suspension no longer adapts as intended, so drive carefully and do not put the check off.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes