3332 — Severe leakage from left inner tyre, axle 3
| Meaning | Severe leakage from left inner tyre, axle 3. |
| System | TPM |
| Family | Manufacturer-native code |
How to read code 3332
Code 3332 is a native MAN code of the "TPM" system: it is stored by the vehicle control unit and is read with a diagnostic tool that supports the manufacturer protocol, not with a generic OBD reader. This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code 3332 mean?
Severe leakage from left inner tyre, axle 3. (System: TPM)
Can I keep driving with code 3332 active?
With caution: limp mode possible, have it checked soon
How do you fix code 3332?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact usOther codes of the same control unit (TPM)
- 3000 — Tyre pressure
- 3010 — Slight leakage: Slight pressure loss at min.
- 3011 — Pressure in left outer tyre, axle 1
- 3012 — Pressure in left inner tyre, axle 1
- 3013 — Pressure in right inner tyre, axle 1
- 3014 — Pressure in right outer tyre, axle 1
- 3020 — Medium leakage: Pressure loss at min.
- 3021 — Pressure in left outer tyre, axle 2
- 3022 — Pressure in left inner tyre, axle 2
- 3023 — Pressure in right inner tyre, axle 2
- Previous code: 3331 — Roller-type sw. 3 start interr. (open)
- Next code: 3333 — Pressure control module E,
Related codes
- 33 — Clutch travel sensor
- 33 — Stop request display door 4
- 3300 — Pressure control module E, no fault
- 3300 — Control unit or cable line
- 3300 — Alternator speed
- 3300 — Alternator / starter
- 3300 — Engine revs
- 3301 — Pressure control module E,
- 3301 — Control unit or peripherals
- 3301 — Engine oil temperature too high
- 3301 — Alternator tl. L
- 3302 — Pressure control module E,