4057 — Pressure control valve
| Meaning | Pressure control valve. |
| System | EBS |
| Family | Manufacturer-native code |
How to read code 4057
Code 4057 is a native MAN code of the "EBS" system: it is stored by the vehicle control unit and is read with a diagnostic tool that supports the manufacturer protocol, not with a generic OBD reader. This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code 4057 mean?
Pressure control valve. (System: EBS)
Can I keep driving with code 4057 active?
With caution: limp mode possible, have it checked soon
How do you fix code 4057?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact usOther codes of the same control unit (EBS)
- 1042 — ISO 11992 (trailer CAN): Data bus switched off
- 1056 — Trailer control module pressure control,
- 1057 — Central control unit - B-controller
- 1058 — Trailer control module - pressure sensor signal
- 1060 — Brake pad wear sensor signal wheel 1
- 1061 — Brake pad wear sensor signal wheel 2
- 1062 — Brake pad wear sensor signal wheel 3
- 1063 — Brake pad wear sensor signal wheel 4
- 1064 — Brake pad wear sensor signal wheel 5
- 1065 — Brake pad wear sensor signal wheel 6
- Previous code: 4056 — Additional turn indicator behind bumper
- Next code: 4058 — Steering angle sensor, CAN communication
Related codes
- 40 — Workshop switch door 1
- 4000 — Foot off accelerator pedal
- 4000 — Communication fault to CRT control unit
- 4000 — No response to DM4 request to control unit 0
- 4000 — External lighting
- 4000 — Headlight low beam
- 4001 — Low air pressure
- 4001 — Central control unit - A-controller: Checksum error in
- 4001 — Exhaust temperature too high or communication
- 4001 — Accumulator charge valve
- 4001 — Selector lever position
- 4001 — Headlight low beam, left