P0216 — Injection Timing Control Circuit Malfunction
| Meaning | The engine computer has detected a problem in the electrical circuit that controls the timing of fuel injection. This means the signals controlling when fuel enters the cylinders are not working as expected, affecting how the engine runs. |
| Family | Powertrain (P) |
Typical symptoms
Engine lacks power or hesitates when you press the accelerator
The engine runs rough or makes unusual knocking noises
Noticeable increase in exhaust smoke
Common causes
Wiring issues, such as damaged harness or poor electrical connections at the injection pump
Failing engine control module
What to do
How to read code P0216
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0216 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (16) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0216 mean?
Injection Timing Control Circuit Malfunction. The engine computer has detected a problem in the electrical circuit that controls the timing of fuel injection. This means the signals controlling when fuel enters the cylinders are not working as expected, affecting how the engine runs.
Can I keep driving with code P0216 active?
With caution: limp mode possible, have it checked soon
Common causes — P0216
Faulty fuel injection pump or actuator Wiring issues, such as damaged harness or poor electrical connections at the injection pump Failing engine control module
How do you fix code P0216?
You should have a technician check the wiring harness and electrical connectors at the injection pump first. It is best to address this issue soon to prevent poor engine performance from causing further stress.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0215 — Engine Shutoff Solenoid Malfunction
- Next code: P0217 — Engine Overtemp Condition
Related codes
- P0200 — Injector Circuit Malfunction
- P0201 — Injector cylinder 1: circuit
- P0202 — Injector Circuit Malfunction - Cylinder 2
- P0203 — Injector Circuit Malfunction - Cylinder 3
- P0204 — Injector Circuit Malfunction - Cylinder 4
- P0205 — Injector Circuit Malfunction - Cylinder 5
- P0206 — Injector Circuit Malfunction - Cylinder 6
- P0207 — Injector Circuit Malfunction - Cylinder 7
- P0208 — Injector Circuit Malfunction - Cylinder 8
- P0209 — Injector Circuit Malfunction - Cylinder 9
- P020A — FUEL INJECTOR 1 PERFORMANCE
- P020B — FUEL INJECTOR 2 PERFORMANCE