P022A — Charge Air Cooler Bypass A: Open Circuit
| Meaning | The engine computer detected an open circuit on control A of the valve that routes boost air around the intercooler instead of through it. The electrical circuit is broken, so the valve cannot be driven. The position and role of "A" depend on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Intake air temperature not well regulated
Loss of performance in some conditions
Uneven running when cold or under load
No obvious symptom in mild cases
Common causes
Broken control wire
Faulty bypass actuator or valve
Missing supply or blown fuse on the circuit
Faulty engine computer (rare)
What to do
How to read code P022A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P022A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (2A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P022A mean?
Charge Air Cooler Bypass A: Open Circuit. The engine computer detected an open circuit on control A of the valve that routes boost air around the intercooler instead of through it. The electrical circuit is broken, so the valve cannot be driven. The position and role of "A" depend on the manufacturer.
Can I keep driving with code P022A active?
With caution: limp mode possible, have it checked soon
Common causes — P022A
Bypass valve connector unplugged or corroded Broken control wire Faulty bypass actuator or valve Missing supply or blown fuse on the circuit Faulty engine computer (rare)
How do you fix code P022A?
Check the connector and wiring of the bypass valve, then its power supply. With a diagnostic tool the valve can be commanded to see whether it responds. It is usually not urgent, but do not ignore it for long, since boost air temperature control may suffer.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0229 — Throttle/Pedal Position Sensor C: Intermittent Sig...
- Next code: P022B — Charge Air Cooler Bypass A: Control Circuit Low
Related codes
- P0200 — Injector circuit: general electrical fault
- P0201 — Injector cylinder 1: circuit
- P0202 — Injector circuit cylinder 2: electrical fault
- P0203 — Injector circuit cylinder 3: electrical fault
- P0204 — Injector circuit cylinder 4: electrical fault
- P0205 — Injector circuit cylinder 5: electrical fault
- P0206 — Injector circuit cylinder 6: electrical fault
- P0207 — Injector circuit cylinder 7: electrical fault
- P0208 — Injector circuit cylinder 8: electrical fault
- P0209 — Injector circuit cylinder 9: electrical fault
- P020A — Injector 1: performance out of range
- P020B — Injector 2: performance out of range