Skip to content
Fault code dictionary (DTC)

P0230 — Fuel Pump Primary Circuit Malfunctioning

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer has detected an electrical fault in the primary circuit that controls the fuel pump relay. This means the signal between the computer and the pump power supply is not working as expected, which can interrupt fuel delivery to the engine.
FamilyPowertrain (P)

Typical symptoms

The engine cranks normally but refuses to start
The engine unexpectedly cuts out while driving
A noticeable lack of power or hesitation under acceleration

Common causes

A blown fuse or a faulty fuel pump relay
Corroded, loose, or damaged wiring in the fuel pump circuit
A failing fuel pump drawing excessive electrical current

What to do

You should check the fuel pump fuse and relay first, as these are the most common and accessible points of failure. Address this issue promptly, because if the circuit fails completely, the car will not run at all.

How to read code P0230

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code P0230 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (30) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0230 mean?

Fuel Pump Primary Circuit Malfunctioning. The engine computer has detected an electrical fault in the primary circuit that controls the fuel pump relay. This means the signal between the computer and the pump power supply is not working as expected, which can interrupt fuel delivery to the engine.

Can I keep driving with code P0230 active?

With caution: limp mode possible, have it checked soon

Common causes — P0230

A blown fuse or a faulty fuel pump relay Corroded, loose, or damaged wiring in the fuel pump circuit A failing fuel pump drawing excessive electrical current

How do you fix code P0230?

You should check the fuel pump fuse and relay first, as these are the most common and accessible points of failure. Address this issue promptly, because if the circuit fails completely, the car will not run at all.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes