Skip to content
Fault code dictionary (DTC)

P0247 — Wastegate solenoid B malfunction

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected a general problem with solenoid B, which controls the wastegate, the valve that regulates turbo pressure. B is the second solenoid, for example on a second turbo or second bank. The code does not say whether the fault is electrical or mechanical.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Turbo pushing too much or too little
Loss of power
Possible protection mode
Unusual turbo noises

Common causes

Faulty wastegate solenoid B
Damaged connector or wiring
Cracked or disconnected vacuum or pressure hoses
Stuck or dirty wastegate
Mechanical turbo problem

What to do

Check the connector and hoses of solenoid B. If the boost is out of control, do not push the engine and have the car checked soon.

How to read code P0247

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0247 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (47) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0247 mean?

Wastegate solenoid B malfunction. The control unit has detected a general problem with solenoid B, which controls the wastegate, the valve that regulates turbo pressure. B is the second solenoid, for example on a second turbo or second bank. The code does not say whether the fault is electrical or mechanical.

Can I keep driving with code P0247 active?

With caution: limp mode possible, have it checked soon

Common causes — P0247

Faulty wastegate solenoid B Damaged connector or wiring Cracked or disconnected vacuum or pressure hoses Stuck or dirty wastegate Mechanical turbo problem

How do you fix code P0247?

Check the connector and hoses of solenoid B. If the boost is out of control, do not push the engine and have the car checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes