Skip to content
Fault code dictionary (DTC)

P0290 — Cylinder 10 contribution/balance fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer noticed that cylinder 10 contributes to engine rotation differently from the others. The cause may be in the injector, the ignition or the mechanics of that cylinder. It applies to engines with at least 10 cylinders.
FamilyPowertrain (P)

Typical symptoms

Vibration and rough running
Loss of power
Unstable idle
Higher fuel consumption
Check engine light on, sometimes flashing

Common causes

Dirty cylinder 10 injector delivering poorly
Worn spark plug or coil on cylinder 10
Air leak near that cylinder
Low compression in cylinder 10
Faulty injector wiring or connector

What to do

Have the spark plug, coil and injector of cylinder 10 checked first. If the engine shakes hard or the light flashes, stop and do not keep driving.

How to read code P0290

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0290 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (90) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0290 mean?

Cylinder 10 contribution/balance fault. The engine computer noticed that cylinder 10 contributes to engine rotation differently from the others. The cause may be in the injector, the ignition or the mechanics of that cylinder. It applies to engines with at least 10 cylinders.

Can I keep driving with code P0290 active?

With caution: limp mode possible, have it checked soon

Common causes — P0290

Dirty cylinder 10 injector delivering poorly Worn spark plug or coil on cylinder 10 Air leak near that cylinder Low compression in cylinder 10 Faulty injector wiring or connector

How do you fix code P0290?

Have the spark plug, coil and injector of cylinder 10 checked first. If the engine shakes hard or the light flashes, stop and do not keep driving.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes