P0579 — Cruise control multi-function input A out of range
| Meaning | The control unit is getting a signal on cruise control multi-function input A that falls outside the expected values or does not match what should be happening. It is not a clear short circuit, but a wrong or unstable value. The exact meaning of input A depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Check engine light on
Cruise buttons respond unreliably
Cruise disengages for no reason
Controls react sometimes and not other times
Common causes
Connector with a weak contact
Abnormal resistance in the wiring
Switch pad or switch with values out of tolerance
Worn steering wheel clockspring
Internal control unit fault, which is uncommon
What to do
How to read code P0579
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0579 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (79) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0579 mean?
Cruise control multi-function input A out of range. The control unit is getting a signal on cruise control multi-function input A that falls outside the expected values or does not match what should be happening. It is not a clear short circuit, but a wrong or unstable value. The exact meaning of input A depends on the manufacturer.
Can I keep driving with code P0579 active?
With caution: limp mode possible, have it checked soon
Common causes — P0579
Worn or corroded contacts in the cruise controls Connector with a weak contact Abnormal resistance in the wiring Switch pad or switch with values out of tolerance Worn steering wheel clockspring Internal control unit fault, which is uncommon
How do you fix code P0579?
Check the connectors and contacts of the controls, since a weak contact is the most common cause of unstable values. Then check the wiring. You can drive normally, but the cruise control may not be reliable.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0578 — Cruise control multi-function input A stuck
- Next code: P057A — Brake pedal position sensor A circuit open
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance