P057A — Brake pedal position sensor A circuit open
| Meaning | The control unit no longer sees the signal from brake pedal position sensor A: the circuit reads as open. This sensor tells the system when and how hard you are braking. Without it, the engine and other systems such as cruise control may limit their performance. |
| Family | Powertrain (P) |
Typical symptoms
Cruise control disabled
Brake lights not working or staying on
Possible engine power limitation
Hard starting or no start on some models
Other dash warnings, for example related to stability control
Common causes
Broken or damaged wiring near the pedal
Faulty pedal position sensor
Sensor adjustment or mounting incorrect
Internal control unit fault, which is rare
What to do
How to read code P057A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P057A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (7A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P057A mean?
Brake pedal position sensor A circuit open. The control unit no longer sees the signal from brake pedal position sensor A: the circuit reads as open. This sensor tells the system when and how hard you are braking. Without it, the engine and other systems such as cruise control may limit their performance.
Can I keep driving with code P057A active?
With caution: limp mode possible, have it checked soon
Common causes — P057A
Sensor connector unplugged or corroded Broken or damaged wiring near the pedal Faulty pedal position sensor Sensor adjustment or mounting incorrect Internal control unit fault, which is rare
How do you fix code P057A?
First check that the brake lights work, since on many vehicles they share this circuit and it is a safety matter. Then check the connector and wiring at the pedal. Have the car checked soon, because the brakes stay mechanical but some assistance systems may be reduced.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0579 — Cruise control multi-function input A out of range
- Next code: P057B — Brake pedal position sensor A range/performance
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance