Skip to content
Fault code dictionary (DTC)

P057F — Battery A state of charge performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the state of charge of battery A is not behaving as it should. This code mainly concerns vehicles with a traction battery or advanced charge management. The exact cause depends on the make and system, and I cannot name it with certainty without knowing the vehicle.
FamilyPowertrain (P)

Typical symptoms

Check engine or hybrid/electric system warning light on
Range or charge level changing strangely
Charge gauge jumping or not believable
Reduced power or limited hybrid function
Hard starting or battery going flat

Common causes

Aged battery with reduced capacity
Current sensor or battery control module giving wrong readings
Loose or corroded terminal connections
Charging problem, for example alternator or charger
Damaged wiring in the battery management system
Missing software update or calibration error

What to do

Check the condition of the terminals and connections and have the battery voltage and capacity measured. If the car is a hybrid or electric, go to a qualified workshop, because high-voltage parts must not be touched without training.

How to read code P057F

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P057F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (7F) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P057F mean?

Battery A state of charge performance. The control unit detected that the state of charge of battery A is not behaving as it should. This code mainly concerns vehicles with a traction battery or advanced charge management. The exact cause depends on the make and system, and I cannot name it with certainty without knowing the vehicle.

Can I keep driving with code P057F active?

With caution: limp mode possible, have it checked soon

Common causes — P057F

Aged battery with reduced capacity Current sensor or battery control module giving wrong readings Loose or corroded terminal connections Charging problem, for example alternator or charger Damaged wiring in the battery management system Missing software update or calibration error

How do you fix code P057F?

Check the condition of the terminals and connections and have the battery voltage and capacity measured. If the car is a hybrid or electric, go to a qualified workshop, because high-voltage parts must not be touched without training.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes