P058A — Battery monitor module performance
| Meaning | The control unit detected that the module that monitors the battery is not working as it should, for example giving current, voltage or temperature readings that are not believable. The exact meaning and the components involved depend on the make and system, and I cannot specify them without knowing the vehicle. It may concern a 12 V battery or a traction battery. |
| Family | Powertrain (P) |
Typical symptoms
Charge gauge not believable
Start-stop or charging function not working as before
Battery going flat or uncertain starting
Reduced power or limited hybrid function, if fitted
Common causes
Battery current sensor or module giving wrong readings
Aged battery giving inconsistent data
Damaged wiring or connector on the module
Communication problem between the module and the control unit
Module software needing an update or recalibration
What to do
How to read code P058A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P058A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (8A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P058A mean?
Battery monitor module performance. The control unit detected that the module that monitors the battery is not working as it should, for example giving current, voltage or temperature readings that are not believable. The exact meaning and the components involved depend on the make and system, and I cannot specify them without knowing the vehicle. It may concern a 12 V battery or a traction battery.
Can I keep driving with code P058A active?
With caution: limp mode possible, have it checked soon
Common causes — P058A
Loose or corroded battery terminal connections Battery current sensor or module giving wrong readings Aged battery giving inconsistent data Damaged wiring or connector on the module Communication problem between the module and the control unit Module software needing an update or recalibration
How do you fix code P058A?
Check the battery terminals and connections and have the voltage and state of health measured. If the battery was replaced recently, on many vehicles the module must be registered with a diagnostic tool. On hybrids and electric cars, go to a qualified workshop.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0589 — Cruise control multi-function input B circuit faul...
- Next code: P058B — Battery monitor module: current reading not plausi...
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance