P058B — Battery monitor module: current reading not plausible
| Meaning | The control unit found that the module monitoring the battery reports current in an unreliable way, or one that does not agree with other data. This does not automatically mean the battery is bad: the module, its sensor or the wiring may be at fault. Which battery it refers to (high-voltage or 12 V) depends on the manufacturer and model. |
| Family | Powertrain (P) |
Typical symptoms
State-of-charge gauge jumping or looking unrealistic
Slow or uncertain starting
Reduced hybrid or regeneration functions
Fault message on the dashboard
Common causes
Damaged wiring to the current sensor
Current sensor inside the module out of calibration or failed
Poor battery terminals or ground connection
Faulty battery monitor module
An internal battery problem skewing the readings
What to do
How to read code P058B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P058B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (8B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P058B mean?
Battery monitor module: current reading not plausible. The control unit found that the module monitoring the battery reports current in an unreliable way, or one that does not agree with other data. This does not automatically mean the battery is bad: the module, its sensor or the wiring may be at fault. Which battery it refers to (high-voltage or 12 V) depends on the manufacturer and model.
Can I keep driving with code P058B active?
With caution: limp mode possible, have it checked soon
Common causes — P058B
Corroded or loose connectors at the module Damaged wiring to the current sensor Current sensor inside the module out of calibration or failed Poor battery terminals or ground connection Faulty battery monitor module An internal battery problem skewing the readings
How do you fix code P058B?
Have the battery terminals and connections checked first, then the module's live data read with a suitable tool. If it is a high-voltage battery, the work must be done by qualified staff. Do not leave it too long: if power limitation appears, have the car looked at.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P058A — Battery monitor module performance
- Next code: P058C — Battery monitor module: temperature reading not pl...
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance