P058F — Battery monitor module: temperature too low
| Meaning | The module monitoring the battery reported a temperature below the allowed limit. In cold weather the battery performs worse and the control unit may limit power and charging. It can be real cold or a sensor reading wrongly. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or charging when cold
Electric range lower than usual
Slower starting
Warning message on the dashboard
Common causes
Faulty temperature sensor or one reading low
Damaged sensor wiring or connector
Battery heating system not working, where fitted
Faulty monitor module
What to do
How to read code P058F
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P058F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (8F) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P058F mean?
Battery monitor module: temperature too low. The module monitoring the battery reported a temperature below the allowed limit. In cold weather the battery performs worse and the control unit may limit power and charging. It can be real cold or a sensor reading wrongly.
Can I keep driving with code P058F active?
With caution: limp mode possible, have it checked soon
Common causes — P058F
Very cold weather with the battery not yet warmed up Faulty temperature sensor or one reading low Damaged sensor wiring or connector Battery heating system not working, where fitted Faulty monitor module
How do you fix code P058F?
If the code appears only in freezing weather and goes away once the car warms up, it may be normal, but still have the sensor checked. If it stays on in warm weather, have the wiring and sensor data checked. It is not usually an emergency, but do not ignore it for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P058E — Battery monitor module: temperature too high
- Next code: P0590 — Cruise control: multi-function input B stuck
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance