P058E — Battery monitor module: temperature too high
| Meaning | The module monitoring the battery reported a temperature above the allowed limit. The control unit may reduce power and charging to protect the battery. It can be real overheating or a wrong sensor reading. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limited charging
Battery cooling fan very loud
Warning message on the dashboard
Reduced electric range
Common causes
Dirty battery air filter or grilles
Liquid cooling circuit problem, where fitted
Temperature sensor reading wrongly
Battery cells in poor condition running too hot
Very demanding use in hot weather
What to do
How to read code P058E
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P058E starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (8E) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P058E mean?
Battery monitor module: temperature too high. The module monitoring the battery reported a temperature above the allowed limit. The control unit may reduce power and charging to protect the battery. It can be real overheating or a wrong sensor reading.
Can I keep driving with code P058E active?
With caution: limp mode possible, have it checked soon
Common causes — P058E
Insufficient battery cooling (fan, ducts or air intakes blocked) Dirty battery air filter or grilles Liquid cooling circuit problem, where fitted Temperature sensor reading wrongly Battery cells in poor condition running too hot Very demanding use in hot weather
How do you fix code P058E?
If a temperature warning appears, stop as soon as it is safe and let the car cool down. Then have the air intakes and battery cooling checked. Do not work on high-voltage batteries yourself: if you notice strange smells or smoke, move away from the vehicle.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P058D — Battery monitor module: voltage reading not plausi...
- Next code: P058F — Battery monitor module: temperature too low
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance