P059B — Active grille air shutter A position sensor range/performance
| Meaning | The control unit found that the position of active grille shutter A, the slats in front of the radiator, does not agree with the command given. A signal is present but its values are not plausible. It can come from blocked slats, an inaccurate sensor or an actuator not following the command. |
| Family | Powertrain (P) |
Typical symptoms
Grille slats not opening or not closing
Higher engine temperature in traffic
Cooling fan working a lot
Noise from the grille actuator
Common causes
Broken grille mechanism or linkage
Worn or faulty shutter actuator
Position sensor out of calibration
Loose connectors
Control unit misreading the signal
What to do
How to read code P059B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P059B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (9B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P059B mean?
Active grille air shutter A position sensor range/performance. The control unit found that the position of active grille shutter A, the slats in front of the radiator, does not agree with the command given. A signal is present but its values are not plausible. It can come from blocked slats, an inaccurate sensor or an actuator not following the command.
Can I keep driving with code P059B active?
With caution: limp mode possible, have it checked soon
Common causes — P059B
Slats blocked by dirt, ice or damage Broken grille mechanism or linkage Worn or faulty shutter actuator Position sensor out of calibration Loose connectors Control unit misreading the signal
How do you fix code P059B?
Have it checked first that the slats move freely and are not broken or blocked. Then live data is needed to compare command and position. Watch the engine temperature on long trips.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P059A — Active grille air shutter A position sensor circui...
- Next code: P059C — Active grille air shutter A position sensor circui...
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance