Skip to content
Fault code dictionary (DTC)

P05DA — PCV regulator valve control circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit reads a higher than expected voltage on the control circuit of the valve that regulates crankcase vapor ventilation (PCV). This often comes from the wire touching a power supply or an electrical fault in the control circuit.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rough or unstable idle
Smell of oil or fumes under the hood
Higher than normal oil consumption
Whistling or hissing from the engine bay
Oil leaks from gaskets

Common causes

Control wire touching a power supply
Valve with an internal electrical fault
Damaged connector or bent terminals
Wiring damaged by heat or rubbing
Faulty control unit, for example a damaged control output (rare)

What to do

Check the valve connector and wiring for signs of heat, rubbing or bent terminals. It will not stop the car, but have it diagnosed soon, because crankcase ventilation that does not regulate well can stress the engine gaskets.

How to read code P05DA

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P05DA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (DA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P05DA mean?

PCV regulator valve control circuit high. The control unit reads a higher than expected voltage on the control circuit of the valve that regulates crankcase vapor ventilation (PCV). This often comes from the wire touching a power supply or an electrical fault in the control circuit.

Can I keep driving with code P05DA active?

With caution: limp mode possible, have it checked soon

Common causes — P05DA

Control wire touching a power supply Valve with an internal electrical fault Damaged connector or bent terminals Wiring damaged by heat or rubbing Faulty control unit, for example a damaged control output (rare)

How do you fix code P05DA?

Check the valve connector and wiring for signs of heat, rubbing or bent terminals. It will not stop the car, but have it diagnosed soon, because crankcase ventilation that does not regulate well can stress the engine gaskets.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes