Skip to content
Fault code dictionary (DTC)

P0627 — Fuel Pump A Control Circuit Open

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer has detected an open circuit in the control loop for the fuel pump. This means the electrical signal from the computer is not reaching the fuel pump relay or the pump itself as expected, interrupting the power supply.
FamilyPowertrain (P)

Typical symptoms

The engine cranks but fails to start
The engine stalls unexpectedly while driving
The check engine light is illuminated on the dashboard

Common causes

Blown fuel pump fuse or faulty relay
Damaged, corroded, or loose wiring in the fuel pump control circuit
Internal failure of the electric fuel pump itself
Faulty engine control module

What to do

You should check the fuses and the fuel pump relay first, as these are the most common and easiest points of failure. Have a technician inspect the wiring and power supply to the pump promptly, especially if the car is currently failing to start.

How to read code P0627

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code P0627 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (27) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0627 mean?

Fuel Pump A Control Circuit Open. The engine computer has detected an open circuit in the control loop for the fuel pump. This means the electrical signal from the computer is not reaching the fuel pump relay or the pump itself as expected, interrupting the power supply.

Can I keep driving with code P0627 active?

With caution: limp mode possible, have it checked soon

Common causes — P0627

Blown fuel pump fuse or faulty relay Damaged, corroded, or loose wiring in the fuel pump control circuit Internal failure of the electric fuel pump itself Faulty engine control module

How do you fix code P0627?

You should check the fuses and the fuel pump relay first, as these are the most common and easiest points of failure. Have a technician inspect the wiring and power supply to the pump promptly, especially if the car is currently failing to start.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes