Skip to content
Fault code dictionary (DTC)

P0670 — Glow Plug Control Module Control Circuit

Severity: Warning Can you drive? Yes, no known limitation Make: All makes (OBD-II standard)
MeaningThe engine computer has detected an electrical fault in the control circuit for the glow plug module. This module is responsible for heating the glow plugs to help start the engine when it is cold.
FamilyPowertrain (P)

Typical symptoms

Difficulty starting the engine, especially in cold weather
Engine cranking longer than usual before starting
White or grey smoke from the exhaust right after starting
Check engine light or glow plug symbol on the dashboard

Common causes

Blown fuse or faulty relay for the glow plug system
Corroded, loose, or damaged wiring harness to the control module
Failed glow plug control module
Internal fault within the engine control unit

What to do

Have a technician check the fuses, power supply, and wiring connections at the glow plug module first. It is best to address this soon, particularly if you live in a colder climate, to avoid putting extra strain on the starter and battery.
Full guide: P0670: meaning, causes and solutions

How to read code P0670

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0670 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (70) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0670 mean?

Glow Plug Control Module Control Circuit. The engine computer has detected an electrical fault in the control circuit for the glow plug module. This module is responsible for heating the glow plugs to help start the engine when it is cold.

Can I keep driving with code P0670 active?

Yes, no known limitation

Common causes — P0670

Blown fuse or faulty relay for the glow plug system Corroded, loose, or damaged wiring harness to the control module Failed glow plug control module Internal fault within the engine control unit

How do you fix code P0670?

Have a technician check the fuses, power supply, and wiring connections at the glow plug module first. It is best to address this soon, particularly if you live in a colder climate, to avoid putting extra strain on the starter and battery.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes