P079A — Transmission friction element A slip detected
| Meaning | The control module compared the gearbox input and output speeds and saw that a friction element, meaning an internal clutch or brake, is slipping more than allowed. The letter A is a label that each manufacturer assigns in its own way, and I have no reliable information on which clutch it is on your brand. Slipping wears away the friction material. |
| Family | Powertrain (P) |
Typical symptoms
Delayed or jerky shifts
Loss of power in one or more gears
Burnt smell from the gearbox oil
Gearbox in limp mode
Transmission or check engine light on
Common causes
Insufficient oil pressure
Faulty solenoid or valve body
Worn clutch or plates
Clogged oil filter
Damaged internal gearbox seals
What to do
How to read code P079A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P079A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (7) points to transmission, and the last two (9A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P079A mean?
Transmission friction element A slip detected. The control module compared the gearbox input and output speeds and saw that a friction element, meaning an internal clutch or brake, is slipping more than allowed. The letter A is a label that each manufacturer assigns in its own way, and I have no reliable information on which clutch it is on your brand. Slipping wears away the friction material.
Can I keep driving with code P079A active?
With caution: limp mode possible, have it checked soon
Common causes — P079A
Low, degraded or burnt gearbox oil Insufficient oil pressure Faulty solenoid or valve body Worn clutch or plates Clogged oil filter Damaged internal gearbox seals
How do you fix code P079A?
Check the oil level and condition right away. This is not a fault to underestimate: if there is slipping, use the car less, avoid loads and hard acceleration, and have the gearbox diagnosed soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0799 — Pressure control solenoid C intermittent fault
- Next code: P079B — Transmission friction element B slip detected
Related codes
- P0700 — Transmission control system: MIL request
- P0701 — Transmission control system: performance outside expected ra...
- P0702 — Transmission control system: electrical fault
- P0703 — Torque converter/brake switch B circuit fault
- P0704 — Clutch switch input circuit fault
- P0705 — Transmission range sensor (PRNDL) circuit fault
- P0706 — Transmission range sensor: signal not plausible
- P0707 — Transmission range sensor circuit: signal too low
- P0708 — Transmission range sensor circuit: signal too high
- P0709 — Transmission range sensor circuit: intermittent signal
- P070A — Transmission fluid level sensor circuit fault
- P070B — Transmission fluid level sensor: reading not plausible