Skip to content
Fault code dictionary (DTC)

P07A0 — Transmission friction element G slip detected

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module found that an internal friction element of the gearbox, a clutch or brake, is slipping beyond the limit. The letter G is a manufacturer label, and I have no reliable information on which element it indicates on your brand. This code usually appears on gearboxes with many gear ratios.
FamilyPowertrain (P)

Typical symptoms

Engine revs rising without push
Delayed or harsh shifts
Loss of power in certain gears
Burnt smell from the gearbox oil
Gearbox in limp mode
Transmission or check engine light on

Common causes

Low, old or burnt gearbox oil
Oil pressure too low
Faulty solenoid or valve body
Worn clutch or plates
Clogged oil filter
Damaged internal seals

What to do

Check the gearbox oil right away for level, color and smell. With slipping under way, avoid strain, towing and hard acceleration, and have the gearbox diagnosed soon.

How to read code P07A0

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P07A0 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (7) points to transmission, and the last two (A0) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P07A0 mean?

Transmission friction element G slip detected. The control module found that an internal friction element of the gearbox, a clutch or brake, is slipping beyond the limit. The letter G is a manufacturer label, and I have no reliable information on which element it indicates on your brand. This code usually appears on gearboxes with many gear ratios.

Can I keep driving with code P07A0 active?

With caution: limp mode possible, have it checked soon

Common causes — P07A0

Low, old or burnt gearbox oil Oil pressure too low Faulty solenoid or valve body Worn clutch or plates Clogged oil filter Damaged internal seals

How do you fix code P07A0?

Check the gearbox oil right away for level, color and smell. With slipping under way, avoid strain, towing and hard acceleration, and have the gearbox diagnosed soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes