Skip to content
Fault code dictionary (DTC)

P07A5 — Transmission friction element B stuck engaged

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe transmission control unit detected that internal friction element "B" stays engaged when it should be released. Friction elements are the clutches and brake packs that select gears. The letter B is chosen by the manufacturer, so the gear involved must be checked in your make's service data.
FamilyPowertrain (P)

Typical symptoms

Jerks or thumps when a gear is selected
A feeling that the car is braking by itself
Engine at risk of stalling in D or R
Gearbox locked in one gear in limp mode
Engine or transmission warning light on
Burning smell from the gearbox

Common causes

Solenoid that stays open and does not release pressure
Dirty, old or incorrectly filled transmission fluid
Valve body with debris or wear
Damaged clutch or brake pack
Faulty wiring or connector at the solenoid
Internal fault in the transmission control unit

What to do

Do not keep driving with the light on, because an element that stays engaged overheats. Have the fluid level and condition checked and all stored codes read. Then have a workshop check the gearbox without leaving it too long.

How to read code P07A5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P07A5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (7) points to transmission, and the last two (A5) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P07A5 mean?

Transmission friction element B stuck engaged. The transmission control unit detected that internal friction element "B" stays engaged when it should be released. Friction elements are the clutches and brake packs that select gears. The letter B is chosen by the manufacturer, so the gear involved must be checked in your make's service data.

Can I keep driving with code P07A5 active?

With caution: limp mode possible, have it checked soon

Common causes — P07A5

Solenoid that stays open and does not release pressure Dirty, old or incorrectly filled transmission fluid Valve body with debris or wear Damaged clutch or brake pack Faulty wiring or connector at the solenoid Internal fault in the transmission control unit

How do you fix code P07A5?

Do not keep driving with the light on, because an element that stays engaged overheats. Have the fluid level and condition checked and all stored codes read. Then have a workshop check the gearbox without leaving it too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes