Skip to content
Fault code dictionary (DTC)

P0A07 — Motor electronics coolant pump control circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a signal that is too high on the circuit commanding the pump that cools the electric motor electronics. This usually means a short to power or a circuit not behaving as expected. The code concerns the circuit, so both the pump and the wiring need to be checked.
FamilyPowertrain (P)

Typical symptoms

Warning light for the hybrid or electric system on
Limited power or limp mode
High electronics temperature warning
Pump running constantly or erratically
Cooling fans very active

Common causes

Short to power in the pump wiring
Damaged connector or moisture in it
Pump with a failed internal winding
Faulty output driver in the control unit
Fuse or relay feeding the circuit abnormally

What to do

Have the pump wiring and connectors inspected and the pump command checked with a diagnostic tool. If temperature warnings appear, do not keep pushing the car. The work should go to a workshop qualified for hybrid or electric vehicles.

How to read code P0A07

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A07 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (07) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A07 mean?

Motor electronics coolant pump control circuit high. The control unit detected a signal that is too high on the circuit commanding the pump that cools the electric motor electronics. This usually means a short to power or a circuit not behaving as expected. The code concerns the circuit, so both the pump and the wiring need to be checked.

Can I keep driving with code P0A07 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A07

Short to power in the pump wiring Damaged connector or moisture in it Pump with a failed internal winding Faulty output driver in the control unit Fuse or relay feeding the circuit abnormally

How do you fix code P0A07?

Have the pump wiring and connectors inspected and the pump command checked with a diagnostic tool. If temperature warnings appear, do not keep pushing the car. The work should go to a workshop qualified for hybrid or electric vehicles.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes