P0A16 — Engine mount control circuit high
| Meaning | The control unit sees too high a level on the circuit that commands the electrically adjusted engine mount. It can point to a short to power or a fault in the actuator or the control unit. The exact meaning depends on the make and model. |
| Family | Powertrain (P) |
Typical symptoms
Stronger vibration when the combustion engine starts or stops
Noises from the engine bay
Jolts when pulling away
Mild or no symptoms in some cases
Common causes
Damaged connector
Faulty mount actuator or solenoid
Fuse or relay feeding the circuit abnormally
Control unit with a faulty output
What to do
How to read code P0A16
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A16 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (16) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A16 mean?
Engine mount control circuit high. The control unit sees too high a level on the circuit that commands the electrically adjusted engine mount. It can point to a short to power or a fault in the actuator or the control unit. The exact meaning depends on the make and model.
Can I keep driving with code P0A16 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A16
Short to power in the mount wiring Damaged connector Faulty mount actuator or solenoid Fuse or relay feeding the circuit abnormally Control unit with a faulty output
How do you fix code P0A16?
Have the wiring, connector and actuator of the mount checked at the workshop. The car usually remains drivable, but with marked vibration it is best to act without too much delay. The mechanical condition of the mount should also be checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A15 — Engine mount control circuit low
- Next code: P0A17 — Motor torque sensor circuit fault
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem