P0A1C — Drive motor B control module performance problem
| Meaning | The control unit found that the module controlling the second drive motor, labelled B, is not working as expected. Not every car has two drive motors, so this code only applies to models that do. The exact cause has to be found through diagnosis. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Uneven drive, especially under acceleration
Warning messages on the dashboard
Vibration or noise from the drive unit
Common causes
Communication problem between control units
Corroded or damaged connectors or wiring
Internal failure of the control module
A fault in drive motor B
Outdated software
What to do
How to read code P0A1C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A1C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (1C) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A1C mean?
Drive motor B control module performance problem. The control unit found that the module controlling the second drive motor, labelled B, is not working as expected. Not every car has two drive motors, so this code only applies to models that do. The exact cause has to be found through diagnosis.
Can I keep driving with code P0A1C active?
With caution: limp mode possible, have it checked soon
Common causes — P0A1C
Low or unstable 12 V voltage Communication problem between control units Corroded or damaged connectors or wiring Internal failure of the control module A fault in drive motor B Outdated software
How do you fix code P0A1C?
Have the related codes read and check the 12 V battery, grounds and connectors. Do not work on the orange high-voltage cables unless qualified. If the drive becomes uneven, use the car less and have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A1B — Drive motor A control module performance problem
- Next code: P0A1D — Hybrid/EV powertrain control module A fault
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem