P0A20 — Motor torque sensor signal too high
| Meaning | The control unit is receiving a higher than normal signal from the electric motor's torque sensor. This sensor tells the system how much force the motor is delivering. A high signal can come from the sensor, its wiring or its power supply. |
| Family | Powertrain (P) |
Typical symptoms
Uneven power delivery
Limited power or limp mode
Jerks when accelerating or lifting off
Hybrid system switching off in some situations
Common causes
Corroded or damaged connector
Faulty torque sensor
Sensor power supply problem
Fault in the control unit that reads it
What to do
How to read code P0A20
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A20 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (20) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A20 mean?
Motor torque sensor signal too high. The control unit is receiving a higher than normal signal from the electric motor's torque sensor. This sensor tells the system how much force the motor is delivering. A high signal can come from the sensor, its wiring or its power supply.
Can I keep driving with code P0A20 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A20
Sensor wiring shorted to supply voltage Corroded or damaged connector Faulty torque sensor Sensor power supply problem Fault in the control unit that reads it
How do you fix code P0A20?
Have the sensor wiring and connector checked, along with the value shown on the diagnostic tool. Do not work on high-voltage parts unless qualified. If driving is uneven, use the car less.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A1F — Battery energy control module A performance proble...
- Next code: P0A21 — Motor torque sensor signal intermittent
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem