Skip to content
Fault code dictionary (DTC)

P0A22 — Generator torque sensor circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected an electrical problem in the circuit of the sensor that measures the hybrid system generator's torque. The code is generic and does not say whether the signal is high, low or unstable: the scan tool data is needed. Details can differ between manufacturers.
FamilyPowertrain (P)

Typical symptoms

Hybrid system warning light on
Uneven charging of the hybrid battery
Limited power or limp mode
Uncertain engine starting
Warning messages on the dashboard

Common causes

Corroded or loose sensor connector
Damaged or shorted wiring
Faulty torque sensor
Unstable sensor power supply
Control unit fault

What to do

Have the wiring, connector and sensor values checked with a scan tool, together with any other stored codes. Do not work on high voltage unless qualified. If the light stays on, limit use of the car.

How to read code P0A22

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A22 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (22) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A22 mean?

Generator torque sensor circuit fault. The control unit detected an electrical problem in the circuit of the sensor that measures the hybrid system generator's torque. The code is generic and does not say whether the signal is high, low or unstable: the scan tool data is needed. Details can differ between manufacturers.

Can I keep driving with code P0A22 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A22

Corroded or loose sensor connector Damaged or shorted wiring Faulty torque sensor Unstable sensor power supply Control unit fault

How do you fix code P0A22?

Have the wiring, connector and sensor values checked with a scan tool, together with any other stored codes. Do not work on high voltage unless qualified. If the light stays on, limit use of the car.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes