P0A31 — Drive motor B temperature sensor: implausible reading
| Meaning | The control unit is receiving a value from the motor B temperature sensor that does not match the real situation, for example it does not change while the motor is working. The signal is present but not trustworthy. The sensor may be inaccurate or stuck. |
| Family | Powertrain (P) |
Typical symptoms
Power reduction with no apparent reason
Fans running even with a cold motor
Temperature display that looks unrealistic, if shown
Fault message on the dashboard
Common causes
Abnormal resistance in the wiring or connector
Moisture in the connector
Sensor fitted or connected badly after a repair
Internal fault in the control unit
What to do
How to read code P0A31
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A31 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (31) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A31 mean?
Drive motor B temperature sensor: implausible reading. The control unit is receiving a value from the motor B temperature sensor that does not match the real situation, for example it does not change while the motor is working. The signal is present but not trustworthy. The sensor may be inaccurate or stuck.
Can I keep driving with code P0A31 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A31
Inaccurate or drifting temperature sensor Abnormal resistance in the wiring or connector Moisture in the connector Sensor fitted or connected badly after a repair Internal fault in the control unit
How do you fix code P0A31?
Have a workshop qualified for high voltage check whether the reading changes logically as the motor warms up. Don't ignore the code for long: an unreliable sensor cannot protect the motor.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A30 — Drive motor B temperature sensor circuit fault
- Next code: P0A32 — Drive motor B temperature sensor: signal too low
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem